A typical central air conditioning niceville fl consist of two sections, the condenser and the evaporator. These are separately placed, the first one usually somewhere out of the house. The second is always in a place in the house where it is not that reachable. This appliance is not something to be ignored and a cleaning routine should be observed regularly.
Unplugging the machine is the very first thing you ought to do if you are to clean the while unit. Since the condenser is outside, it should be cleaned first. Take out anything that is blocking the air passage of the fan. Even if these are just leaves, tissue paper or anything else. It is protected by a metal grill and this would mean that you need to remove it to clean the fan.
In cleaning the fin, use a soft brush to take out dirt inserted between the lines of the fin. There are some cases that you need to remove the grill for you to clean it thoroughly. This is one of the delicate parts of the machine and you have to clean it with full attention. If a fin line is bent, get a fin comb and brush it with that.
Also check whether the tube of the refrigerant lines are in good shape or attached correctly. Some tubes cannot tolerate the hot and cold temperature and therefore exposure to the sun and rain will cause them to break. Assure that the tubes have no holes. If the tubes are too old then change for a new one with the help of the company.
After that, get inside and see the evaporator. The very first thing you have to check is the cover on the plenum. A foil covered plenum means that the machine can be unsealed and can be cleaned by a casual. But once the plenum has a metal sheet cover, this means that only the company is authorized to clean the internal of your machine. And once it is unsealed by a casualty, whatever happened the company will hold no liability.
For the reachable unit, just carefully get the foil out which is oftentimes attached with tapes into the plenum and put it somewhere safe. The you can see a lamina probably circular or rectangular which is tightly screwed. Take out the screws with a screw driver and keep them in a place. Remember, do not use anything which are not mentioned in order to keep you safe.
Then clean the entire unit with a stiff brush. Try to reach the entire area, if you cannot, the slowly slide a small part of it. Just make sure that your evaporator can be slid, for there are some that cannot be. And also be careful with the pipes, make sure that nothing will be bent.
The tray underneath the evaporator must also be included. This is a fungi prone part of the whole unit and therefore must be ignored everytime you do the routine. In cleaning for this part you only need to discharge one tablespoon of bleach. After that set back the whole attachments and turn it on and check whether there are still leaks.
Maintaining an air conditioning niceville fl unit is very a bit mind blowing. If you think that your ability in household sanitation is not enough to handle such case, the seek for a help from the experts. Just remember that it is better to admit your weaknesses than pretending to have knowledge for everything.
Unplugging the machine is the very first thing you ought to do if you are to clean the while unit. Since the condenser is outside, it should be cleaned first. Take out anything that is blocking the air passage of the fan. Even if these are just leaves, tissue paper or anything else. It is protected by a metal grill and this would mean that you need to remove it to clean the fan.
In cleaning the fin, use a soft brush to take out dirt inserted between the lines of the fin. There are some cases that you need to remove the grill for you to clean it thoroughly. This is one of the delicate parts of the machine and you have to clean it with full attention. If a fin line is bent, get a fin comb and brush it with that.
Also check whether the tube of the refrigerant lines are in good shape or attached correctly. Some tubes cannot tolerate the hot and cold temperature and therefore exposure to the sun and rain will cause them to break. Assure that the tubes have no holes. If the tubes are too old then change for a new one with the help of the company.
After that, get inside and see the evaporator. The very first thing you have to check is the cover on the plenum. A foil covered plenum means that the machine can be unsealed and can be cleaned by a casual. But once the plenum has a metal sheet cover, this means that only the company is authorized to clean the internal of your machine. And once it is unsealed by a casualty, whatever happened the company will hold no liability.
For the reachable unit, just carefully get the foil out which is oftentimes attached with tapes into the plenum and put it somewhere safe. The you can see a lamina probably circular or rectangular which is tightly screwed. Take out the screws with a screw driver and keep them in a place. Remember, do not use anything which are not mentioned in order to keep you safe.
Then clean the entire unit with a stiff brush. Try to reach the entire area, if you cannot, the slowly slide a small part of it. Just make sure that your evaporator can be slid, for there are some that cannot be. And also be careful with the pipes, make sure that nothing will be bent.
The tray underneath the evaporator must also be included. This is a fungi prone part of the whole unit and therefore must be ignored everytime you do the routine. In cleaning for this part you only need to discharge one tablespoon of bleach. After that set back the whole attachments and turn it on and check whether there are still leaks.
Maintaining an air conditioning niceville fl unit is very a bit mind blowing. If you think that your ability in household sanitation is not enough to handle such case, the seek for a help from the experts. Just remember that it is better to admit your weaknesses than pretending to have knowledge for everything.
About the Author:
Read more about Guide In Doing An Air Conditioning Maintenance visiting our website.
No comments:
Post a Comment