Radon is an odorless and colorless gas that occurs in the atmosphere in very small amounts. The gas is generated from natural breakdown of radioactive materials in the surface of the earth. The gas is supposed to exist in the soil or in the atmosphere, but it can also find its way into houses and other buildings. If this happens, it is important to have it remediated because it is a very dangerous gas, with the capability of causing cancer. This is what Maryland radon mitigation contractors are all about.
The gas is not as dangerous when it is found in small amounts. The danger is brought about when there is a high concentration beyond a given level. It is best to do regular checks so as to be sure of the radon amount in the house. One can simply buy a test kit from the market for use in performing the testing process. It is advisable to hire an expert if one has no confidence in their own skills.
Although this might sound simple, purchasing and installing a radon mitigation kit is not a simple thing. One must follow some steps strictly and closely so that good results can be achieved. Since this gas comes from the ground, drilling holes into the foundation and sucking out the gas actively is involved when using mitigation kits.
The gas that is sucked is then expelled from the house through the roof. Accomplishing this will require pipes to be run from the foundation all the way to the roof. The pipes installed at the foundation must be sealed properly to ensure that no gas escapes into the house. Failure to seal properly may prove to be counterproductive in the long term because the gas will still be present in the house.
Knowing the radon levels in the house is important before conducting any step included in the mitigation process. Therefore, a radon detector should be used to test the whole house first. Detectors exist in different prices and they can be purchased easily from a home depot. However, purchasing a long term detector is recommendable.
Most importantly, one also needs to be aware of the age of the house. Knowing this assists in determining the installation method. Mostly, it is unlikely for houses built before the 1970s to have ideal fills. This means that the gas cannot escape beneath the house because the fills are dense. This might make it difficult to suck out the gas.
Conducting thorough planning before the pipes that should be used to suck the gas under the house are laid is important. The width and diameter of the pipes used should be 3 to 4 inches. This implies that the holes that have to be drilled in the house should be wide enough so that the pipes can fit in them.
It is important to include fan in the entire set up. Fans are usually installed to pool the gas in case there is a leak. The fan should be located away from the living room. It is preferable to have it installed in the garage, attic, or even outside the house.
The gas is not as dangerous when it is found in small amounts. The danger is brought about when there is a high concentration beyond a given level. It is best to do regular checks so as to be sure of the radon amount in the house. One can simply buy a test kit from the market for use in performing the testing process. It is advisable to hire an expert if one has no confidence in their own skills.
Although this might sound simple, purchasing and installing a radon mitigation kit is not a simple thing. One must follow some steps strictly and closely so that good results can be achieved. Since this gas comes from the ground, drilling holes into the foundation and sucking out the gas actively is involved when using mitigation kits.
The gas that is sucked is then expelled from the house through the roof. Accomplishing this will require pipes to be run from the foundation all the way to the roof. The pipes installed at the foundation must be sealed properly to ensure that no gas escapes into the house. Failure to seal properly may prove to be counterproductive in the long term because the gas will still be present in the house.
Knowing the radon levels in the house is important before conducting any step included in the mitigation process. Therefore, a radon detector should be used to test the whole house first. Detectors exist in different prices and they can be purchased easily from a home depot. However, purchasing a long term detector is recommendable.
Most importantly, one also needs to be aware of the age of the house. Knowing this assists in determining the installation method. Mostly, it is unlikely for houses built before the 1970s to have ideal fills. This means that the gas cannot escape beneath the house because the fills are dense. This might make it difficult to suck out the gas.
Conducting thorough planning before the pipes that should be used to suck the gas under the house are laid is important. The width and diameter of the pipes used should be 3 to 4 inches. This implies that the holes that have to be drilled in the house should be wide enough so that the pipes can fit in them.
It is important to include fan in the entire set up. Fans are usually installed to pool the gas in case there is a leak. The fan should be located away from the living room. It is preferable to have it installed in the garage, attic, or even outside the house.
About the Author:
You can get valuable tips on how to choose Maryland radon mitigation contractors and more information about an experienced contractor at http://www.mitigatemyradon.com now.
No comments:
Post a Comment